dotfiles/GNUmakefile

include dotfiles.mk

MODULES=xmodmap emacs picom cower mowedline herbstluftwm
STOW=stow

.PHONY: all clean $(MODULES) zsh

all: $(MODULES)

clean: $(addsuffix -clean,$(MODULES))

zsh:
	$(MAKE) -C $@

before-%-install:				# Dummy recipe
	@true

%-stow: % before-%-install
	$(STOW) $<

%-install: %-stow				# Dummy recipe
	@true

%-uninstall:
	$(STOW) -D $(subst -uninstall,,$@)

# Picom

picom: picom/.config/picom.conf

picom/.config/picom.conf: picom/.config/picom.org
	$(call tangle,conf)

picom-clean:
	rm -f picom/.config/picom.conf

#########
# Emacs #
#########

emacs-install: emacs-stow
	xdg-settings set default-url-scheme-handler org-protocol EmacsClient.desktop

###########
# Xmodmap #
###########

xmodmap: Xmodmap/.Xmodmap

Xmodmap/.Xmodmap: Xmodmap/Xmodmap.org
	$(call tangle,fundamental)

xmodmap-clean:
	rm -f Xmodmap/.Xmodmap

#########
# Cower #
#########

cower: cower/.config/cower/config

cower/.config/cower/config: cower/.config/cower/config.org
	$(call tangle,conf-unix)

cower-clean:
	rm -f cower/.config/cower/config

#############
# Mowedline #
#############

mowedline: mowedline/.config/mowedline/init.scm

mowedline/.config/mowedline/init.scm: SCHEME_IMPLEMENTATION = chicken
mowedline/.config/mowedline/init.scm: mowedline/.config/mowedline/init.org
	$(call tangle,scheme)

mowedline-clean:
	rm -f mowedline/.config/mowedline/init.scm

#########
# Dunst #
#########

dunst: dunst/.config/dunst/dunstrc

dunst/.config/dunst/dunstrc: dunst/.config/dunst/dunstrc.org
	$(call tangle,conf-unix)

dunst-clean:
	rm -f dunst/.config/dunst/dunstrc

# X11

x11-install: lib-install x11/dot-x11-0-1-any.pkg.tar.xz

x11/dot-x11-0-1-any.pkg.tar.xz: x11/PKGBUILD
	cd x11 && makepkg -sicf
Build Xmodmap from top-level Makefile 2017-04-03 05:22:36 +02:00			`include dotfiles.mk`
Add top-level Makefile 2016-11-24 21:45:18 +01:00
Add herbstluftwm as a module 2021-10-22 09:50:36 +02:00			`MODULES=xmodmap emacs picom cower mowedline herbstluftwm`
Use .stowrc instead of a bash wrapper around stow The comment in ‘stow-home’ claims that ‘.stowrc’ doesn’t support variable expansion. I don’t know if I couldn’t figure it out before or if stow has been updated since then, but it seems to work fine now. 2020-04-15 09:48:00 +02:00			`STOW=stow`
Build Xmodmap from top-level Makefile 2017-04-03 05:22:36 +02:00
			`.PHONY: all clean $(MODULES) zsh`

			`all: $(MODULES)`

			`clean: $(addsuffix -clean,$(MODULES))`
Add top-level Makefile 2016-11-24 21:45:18 +01:00
			`zsh:`
			`$(MAKE) -C $@`
Build Xmodmap from top-level Makefile 2017-04-03 05:22:36 +02:00
Add pre- and post-install recipes for configurations Use the post-install recipe for Emacs to configure it to open org-protocol requests. 2020-05-10 08:52:46 +02:00			`before-%-install: # Dummy recipe`
			`@true`

			`%-stow: % before-%-install`
Properly use first prerequisite instead of all for stow 2020-04-27 05:58:39 +02:00			`$(STOW) $<`
Use mask to call into make 2020-04-25 05:49:40 +02:00
Add pre- and post-install recipes for configurations Use the post-install recipe for Emacs to configure it to open org-protocol requests. 2020-05-10 08:52:46 +02:00			`%-install: %-stow # Dummy recipe`
			`@true`

Use mask to call into make 2020-04-25 05:49:40 +02:00			`%-uninstall:`
			`$(STOW) -D $(subst -uninstall,,$@)`
Make stow target generic 2018-01-09 06:16:02 +01:00
Rename Compton to Picom They renamed the project and it’s been warning me about this for a while. 2020-04-27 01:12:05 +02:00			`# Picom`
Add compton to top-level Makefile 2017-06-22 09:07:28 +02:00
Rename Compton to Picom They renamed the project and it’s been warning me about this for a while. 2020-04-27 01:12:05 +02:00			`picom: picom/.config/picom.conf`
Add compton to top-level Makefile 2017-06-22 09:07:28 +02:00
Rename Compton to Picom They renamed the project and it’s been warning me about this for a while. 2020-04-27 01:12:05 +02:00			`picom/.config/picom.conf: picom/.config/picom.org`
Add compton to top-level Makefile 2017-06-22 09:07:28 +02:00			`$(call tangle,conf)`

Rename Compton to Picom They renamed the project and it’s been warning me about this for a while. 2020-04-27 01:12:05 +02:00			`picom-clean:`
			`rm -f picom/.config/picom.conf`
Add compton to top-level Makefile 2017-06-22 09:07:28 +02:00
Add Emacs build targets to top-level Makefile 2017-04-03 05:52:42 +02:00			`#########`
			`# Emacs #`
			`#########`

Add pre- and post-install recipes for configurations Use the post-install recipe for Emacs to configure it to open org-protocol requests. 2020-05-10 08:52:46 +02:00			`emacs-install: emacs-stow`
			`xdg-settings set default-url-scheme-handler org-protocol EmacsClient.desktop`

Build Xmodmap from top-level Makefile 2017-04-03 05:22:36 +02:00			`###########`
			`# Xmodmap #`
			`###########`

			`xmodmap: Xmodmap/.Xmodmap`

			`Xmodmap/.Xmodmap: Xmodmap/Xmodmap.org`
			`$(call tangle,fundamental)`

			`xmodmap-clean:`
			`rm -f Xmodmap/.Xmodmap`

Move cower build to top-level Makefile 2018-01-09 05:48:18 +01:00			`#########`
			`# Cower #`
			`#########`

			`cower: cower/.config/cower/config`

			`cower/.config/cower/config: cower/.config/cower/config.org`
			`$(call tangle,conf-unix)`

			`cower-clean:`
			`rm -f cower/.config/cower/config`
Add mowedline targets to top Makefile 2018-01-09 06:21:01 +01:00
			`#############`
			`# Mowedline #`
			`#############`

			`mowedline: mowedline/.config/mowedline/init.scm`

			`mowedline/.config/mowedline/init.scm: SCHEME_IMPLEMENTATION = chicken`
			`mowedline/.config/mowedline/init.scm: mowedline/.config/mowedline/init.org`
			`$(call tangle,scheme)`

			`mowedline-clean:`
			`rm -f mowedline/.config/mowedline/init.scm`
Add dunst targets to top Makefile 2018-01-09 07:33:43 +01:00
			`#########`
			`# Dunst #`
			`#########`

			`dunst: dunst/.config/dunst/dunstrc`

			`dunst/.config/dunst/dunstrc: dunst/.config/dunst/dunstrc.org`
			`$(call tangle,conf-unix)`

			`dunst-clean:`
			`rm -f dunst/.config/dunst/dunstrc`
Add meta-package for my X11 configuration With this meta-package it locks down which packages should be installed. 2020-04-27 06:35:26 +02:00
			`# X11`

			`x11-install: lib-install x11/dot-x11-0-1-any.pkg.tar.xz`

			`x11/dot-x11-0-1-any.pkg.tar.xz: x11/PKGBUILD`
			`cd x11 && makepkg -sicf`