dotfiles/emacs/.emacs.d/init.org

#+TITLE: Tom-Emacs Interface
#+STARTUP: showall

This is my personal Emacs configuration.  The name was inspired by
"Ghost in the Shell 2: Man-Machine Interface and Ryan Rix's "Complete
Computing Environment".

To start off, first I need to enable lexical binding.

#+BEGIN_SRC emacs-lisp :padline no
  ;; -*- lexical-binding: t; -*-
#+END_SRC

* Package configuration

  Require package.el since I immediately start using its variables and
  functions anyway, no need to delay loading.

  #+BEGIN_SRC emacs-lisp
    (require 'package)
  #+END_SRC

  Add the MELPA and org package archives because I like living on the
  bleeding edge. This should be done both at run-time and compile-time
  so I can install packages at compile time.

  #+BEGIN_SRC emacs-lisp
    (eval-and-compile
      (add-to-list 'package-archives '("melpa" . "https://melpa.org/packages/"))
      (add-to-list 'package-archives '("org" . "http://orgmode.org/elpa/")))
  #+END_SRC

  Initialize package.el so that packages can be loaded and used. This
  also needs to be done at both run-time and compile-time so packages
  can be installed at compile-time.

  #+BEGIN_SRC emacs-lisp
    (eval-and-compile (package-initialize))
  #+END_SRC

  Refresh the package contents so packages can be installed from all
  configured archives. Don't do this at run-time because it slows down
  the process too much.

  #+BEGIN_SRC emacs-lisp
    (eval-when-compile (package-refresh-contents))
  #+END_SRC

  This macro is inspired by use-package, but I want to maintain some
  control of the syntax I use to configure my settings.

  #+BEGIN_SRC emacs-lisp
    (defmacro ensure-library (library &rest args)
      "Make sure LIBRARY is installed.

    ARGS should be a plist which may contain one of the following options:

    - :package

      Specify which package should actually be installed to ensure
      the library named in LIBRARY exists.

    - :path

      Specify a path to add to the load path to be able to load this
      package."
      (declare (indent 1))
      (let ((library-symbol (cl-gensym))
            (package-symbol (cl-gensym))
            (path-symbol (cl-gensym))
            (package (or (plist-get args :package) library))
            (path (plist-get args :path)))
        `(progn
           (eval-and-compile
             (let ((,path-symbol ,path))
               (if ,path-symbol
                   (add-to-list 'load-path
                                (if (file-name-absolute-p ,path-symbol)
                                    ,path-symbol
                                  (concat user-emacs-directory ,path-symbol))))))
           (eval-when-compile
             (let ((,library-symbol ',library)
                   (,package-symbol ',package))
               (unless (require ,library-symbol nil :noerror)
                 (package-install ,package-symbol)
                 (require ,library-symbol)))))))
  #+END_SRC

* Site lisp

  Setup everything so that any autoloads in ~site-lisp/~ get loaded
  and can be used.

  #+BEGIN_SRC emacs-lisp
    (eval-and-compile
      (add-to-list 'load-path (locate-user-emacs-file "site-lisp/"))
      (let ((loaddefs (locate-user-emacs-file "site-lisp/site-autoloads.el")))
        (when (file-exists-p loaddefs)
          (load loaddefs))))
  #+END_SRC

* Helper functions

  I have noticed that I refer to the combination of
  =user-emacs-directory= and "data/" a lot, so I wrote this function
  to make referencing it cleaner. Also useful if I ever want to move
  my data directory.

  #+BEGIN_SRC emacs-lisp
    (defun oni:data-location (file-name)
      "Return the location of FILE-NAME within my data directory.
    This is currently the data directory under the
    `user-emacs-directory'."
      (concat user-emacs-directory "data/" file-name))
  #+END_SRC

  I also wrote a test for it.

  #+BEGIN_SRC emacs-lisp
    (with-eval-after-load 'ert
      (ert-deftest oni:data-location ()
        "Test that `oni:data-location' returns the correct locations."
        (should (string= "~/.emacs.d/data/backup-files/"
                         (oni:data-location "backup-files/")))
        (should (string= "~/.emacs.d/data/auto-save-files/"
                         (oni:data-location "auto-save-files/")))
        (should (string= "~/.emacs.d/data/auto-save-list/.saves-"
                         (oni:data-location "auto-save-list/.saves-")))))
  #+END_SRC

* Backups

  I don't like having every directory filled with "filename~"
  files. So instead of saving backup files to the same directory, save
  them to a special one instead.

  #+BEGIN_SRC emacs-lisp
    (setq backup-directory-alist `((".*" . ,(oni:data-location "backup-files/"))))
  #+END_SRC

* Auto saves

  I prefer to keep all autosave files in a single directory so they
  don't clog up my filesystem so much. Usually these files get
  deleted, but sometimes they don't, and I don't think they look
  pretty. Add it to the end of the list because the default value
  stores auto-saves for remote files in /tmp, which is fine by me.

  #+BEGIN_SRC emacs-lisp
    (add-to-list 'auto-save-file-name-transforms
                 `(".*" ,(oni:data-location "auto-save-files/") t) :append)
  #+END_SRC

  Place the files which contain the auto save files in a similar
  directory.

  #+BEGIN_SRC emacs-lisp
    (setq auto-save-list-file-prefix (oni:data-location "auto-save-list/.saves-"))
  #+END_SRC

* Tabs

  Generally I prefer using spaces over tabs. Especially for lisp-like
  languages.

  #+BEGIN_SRC emacs-lisp
    (setq-default indent-tabs-mode nil)
  #+END_SRC

  A tab-width of 8 is too wide for me, and 2 is too narrow. 4 is just
  right.

  #+BEGIN_SRC emacs-lisp
    (setq-default tab-width 4)
  #+END_SRC

* Font

  Set the default font to a more pleasing one, in my opinion, with a
  better size as well.

  #+BEGIN_SRC emacs-lisp
    (add-to-list 'default-frame-alist '(font . "Fantasque Sans Mono-15"))
  #+END_SRC

* Internal border

  For aesthetics I like to have a thick border on the inside of my
  Emacs window. I have the same border in URxvt, but I haven't found
  out how to add it to Conkeror yet.

  #+BEGIN_SRC emacs-lisp
    (add-to-list 'default-frame-alist '(internal-border-width . 15))
  #+END_SRC

* Menu bar

  I don't use the menu bar, so it just takes up space.

  #+BEGIN_SRC emacs-lisp
    (menu-bar-mode -1)
  #+END_SRC

* Tool bar

  I don't use the tool bar, so it just takes up space.

  #+BEGIN_SRC emacs-lisp
    (tool-bar-mode -1)
  #+END_SRC

* Scroll bar

  I don't use the scroll bar to either navigate my buffers or see
  whereabouts I am, so they just take up space.

  #+BEGIN_SRC emacs-lisp
    (scroll-bar-mode -1)
  #+END_SRC

* Whitespace

  I hate it when trailing whitespace is left around a file. I've been
  using this for years, and apart from having some trouble working
  with people who don't pay attention to it, it has worked flawlessly.

  #+BEGIN_SRC emacs-lisp
    (ensure-library destroy-trailing-whitespace
      :path "vendor-lisp/destroy-trailing-whitespace")
    (require 'destroy-trailing-whitespace)
    (global-destroy-trailing-whitespace-mode)
  #+END_SRC

  Having a final newline at the end of the file is always a good
  idea. Some programs just don't work without it and others produce
  some strange results. Github diffs are an example.

  #+BEGIN_SRC emacs-lisp
    (setq require-final-newline t)
  #+END_SRC

* Long lines

  By default Emacs wraps long lines around to the next line when they
  reach the far end of the window. However I prefer to have them
  truncated instead.

  #+BEGIN_SRC emacs-lisp
    (setq-default truncate-lines t)
  #+END_SRC

* Theme

  #+BEGIN_SRC emacs-lisp
    (ensure-library yoshi-theme
      :path "vendor-lisp/yoshi-theme")
    (add-to-list 'custom-theme-load-path
                 (concat user-emacs-directory "vendor-lisp/yoshi-theme"))
    (load-theme 'yoshi :no-confirm)
  #+END_SRC

* Diminish

  I really don't need to see some of the minor modes.

  #+BEGIN_SRC emacs-lisp
    (ensure-library diminish)
    (require 'diminish)
  #+END_SRC

* Ivy

  Ivy is a completing read implementation that offers choises
  vertically. I'm surprised how much I like it. I've tried Swiper
  before and I didn't like that so much.

  #+BEGIN_SRC emacs-lisp
    (ensure-library ivy)
  #+END_SRC

  Also install the =flx= package to allow ivy to use fuzzy matching.

  #+BEGIN_SRC emacs-lisp
    (ensure-library flx)
  #+END_SRC

  Since I immediately use and enable Ivy, there's no need to autoload
  it, so require it to keep the byte-compiler quiet.

  #+BEGIN_SRC emacs-lisp
    (require 'ivy)
  #+END_SRC

  Don't show that ivy is enabled in the mode-line. It's enabled
  globally and I'll notice it from other things anyway (like it
  showing up).

  #+BEGIN_SRC emacs-lisp
    (diminish 'ivy-mode)
  #+END_SRC

  Enable fuzzy matching in Ivy.

  #+BEGIN_SRC emacs-lisp
    (setq ivy-re-builders-alist '((t . ivy--regex-fuzzy))
          ivy-initial-inputs-alist nil)
  #+END_SRC

  Enable Ivy.

  #+BEGIN_SRC emacs-lisp
    (ivy-mode)
  #+END_SRC

* Counsel

  Counsel is a group of functions that use Ivy to specialize on
  certain built-in commands, such as M-x.

  #+BEGIN_SRC emacs-lisp
    (ensure-library counsel)
  #+END_SRC

  Since I enable Counsel mode immediately, there's no point in leaving
  it to be autoloaded. Requiring it keeps the byte-compiler happy.

  #+BEGIN_SRC emacs-lisp
    (require 'counsel)
  #+END_SRC

  Enable Counsel.

  #+BEGIN_SRC emacs-lisp
    (counsel-mode)
  #+END_SRC

  Don't show that counsel is enabled in the mode-line. It's enabled
  globally and I'll notice whenever I press M-x for example.

  #+BEGIN_SRC emacs-lisp
    (diminish 'counsel-mode)
  #+END_SRC

* Bookmarks

  Save bookmarks in my data directory so my =user-emacs-directory= is less cluttered.

  #+BEGIN_SRC emacs-lisp
    (eval-when-compile (require 'bookmark))
    (setq bookmark-default-file (oni:data-location "bookmarks"))
  #+END_SRC

* Personal info

  Set some personal info for, for example, Gnus to use.

  #+BEGIN_SRC emacs-lisp
    (setq user-full-name "Tom Willemse"
          user-mail-address "tom@ryuslash.org")
  #+END_SRC

* Minor modes

** Paredit

   Paredit is an awesome minor-mode to have when you write in any
   lisp-like languages. It can feel rather strict and uncomfortable at
   first, but once you get the hang of using it, you won't want to
   live without it.

   #+BEGIN_SRC emacs-lisp
     (ensure-library paredit)
   #+END_SRC

** Electric indent mode

   By default `electric-indent-mode' is enabled globally, but I prefer
   to enable it locally where I need it.

   #+BEGIN_SRC emacs-lisp
     (electric-indent-mode -1)
   #+END_SRC

   Since Emacs 24 `electric-indent-mode' switches the behavior of the
   C-j and RET keys. I prefer the original situation because my
   muscle-memory still remembers to use C-j for newline-and-indent
   behaviour.

   #+BEGIN_SRC emacs-lisp
     (defun oni:switch-newline-keys ()
       "Switch the C-j and RET keys in the local buffer."
       (if electric-indent-mode
           (progn
             (local-set-key (kbd "C-j") 'newline)
             (local-set-key (kbd "RET") 'electric-newline-and-maybe-indent))
         (local-unset-key (kbd "C-j"))
         (local-unset-key (kbd "RET"))))

     (add-hook 'electric-indent-local-mode-hook #'oni:switch-newline-keys)
   #+END_SRC

** Flycheck

   Flycheck lets me see (compiler) errors, warnings and info messages
   while writing code.

   #+BEGIN_SRC emacs-lisp
     (ensure-library flycheck)
   #+END_SRC

   When developing packages with Cask, some special care needs to be
   taken to ensure the checkers work correctly.

   #+BEGIN_SRC emacs-lisp
     (ensure-library flycheck-cask)
     (add-hook 'flycheck-mode-hook 'flycheck-cask-setup)
   #+END_SRC

   I disable the pylint and pyflakes checkers because they don't seem
   to add much except noise when used together with flake8. Also
   pylint seems hell-bent on making Python written like a
   statically-typed langauge.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'flycheck
       (mapc (lambda (c) (delq c flycheck-checkers))
             '(python-pylint python-pyflakes)))
   #+END_SRC

   Also show which columns messages appear in.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'flycheck
       (setq flycheck-highlighting-mode 'columns))
   #+END_SRC

   Show the error message at point in a tooltip.

   #+BEGIN_SRC emacs-lisp
     (ensure-library flycheck-pos-tip)

     (with-eval-after-load 'flycheck
       (require 'flycheck-pos-tip)
       (flycheck-pos-tip-mode))
   #+END_SRC

** Auto revert mode

   ARev isn't very descriptive, and fairly wide. Use a font-awesome icon instead.

   #+BEGIN_SRC emacs-lisp
     (diminish 'auto-revert-mode
               (propertize (concat "  " (char-to-string #xf021))
                           'face '(:family "Font Awesome" :height 0.75)))
   #+END_SRC

** Auto fill mode

   "Fill" is fine as a mode-line lighter, but I prefer something
   shorter.

   #+BEGIN_SRC emacs-lisp
     (diminish 'auto-fill-function
               (propertize (concat "  " (char-to-string #xf149))
                           'face '(:family "Font Awesome" :height 0.75)))
   #+END_SRC

** Diff highlight mode

   Show the state of lines added, changed and removed since the last
   commit.

   #+BEGIN_SRC emacs-lisp
     (ensure-library diff-hl)
     (require 'diff-hl)
     (global-diff-hl-mode)
   #+END_SRC

** Hydra

   Hydra is an interesting way of managing keybindings, I want to
   experiment.

   #+BEGIN_SRC emacs-lisp
     (ensure-library hydra)
   #+END_SRC

   Add a hydra for org.

   #+BEGIN_SRC emacs-lisp
     (global-set-key (kbd "C-c o") 'oni-hydra-org/body)
   #+END_SRC

   Add a hydra for magit.

   #+BEGIN_SRC emacs-lisp
     (global-set-key (kbd "C-c m") 'oni-hydra-magit/body)
   #+END_SRC

* Major modes

** Emacs lisp mode

   Enable paredit mode.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'emacs-lisp-mode-hook 'paredit-mode)
   #+END_SRC

** Scheme mode

   Enable paredit mode.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'scheme-mode-hook 'paredit-mode)
   #+END_SRC

   Add scsh to the list of known interpreters for scheme mode. This
   way shell-scripts that don't have a file extension but specify scsh
   as the interpreter are opened in scheme mode.

   #+BEGIN_SRC emacs-lisp
     (add-to-list 'interpreter-mode-alist '("scsh" . scheme-mode))
   #+END_SRC

** Inferior Emacs lisp mode (ielm)

   Enable paredit mode.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'inferior-emacs-lisp-mode-hook 'paredit-mode)
   #+END_SRC

** Mbsync configuration mode

   I wrote a simple major-mode for editing my =.mbsyncrc= file. I
   might release it as a package, but for now I keep it with the rest
   of my configuration.

   #+BEGIN_SRC emacs-lisp
     (ensure-library mbsync-conf-mode
       :path "vendor-lisp/mbsync-conf-mode")
   #+END_SRC

   Since it isn't installed by package.el, I need to specify the
   autoload myself.

   #+BEGIN_SRC emacs-lisp
     (autoload 'mbsync-conf-mode "mbsync-conf-mode"
       "Major mode for editing mbsync configuration files."
       :interactive)
   #+END_SRC

   I also need to add it to the =auto-mode-alist= so ~.mbsyncrc~ is
   opened with mbsync conf mode.

   #+BEGIN_SRC emacs-lisp
     (add-to-list 'auto-mode-alist '("\\.mbsyncrc\\'" . mbsync-conf-mode))
   #+END_SRC

** Msmtprc mode

   I wrote a simple major-mode for editing my =.msmtprc= file. I might
   release it as a package, but for now I keep it with the rest of my
   configuration.

   #+BEGIN_SRC emacs-lisp
     (ensure-library msmtprc-mode
       :path "vendor-lisp/msmtprc-mode")
   #+END_SRC

   Since it isn't installed by package.el, I need to specify the
   autoload myself.

   #+BEGIN_SRC emacs-lisp
     (autoload 'msmtprc-mode "msmtprc-mode"
       "Major mode for editing msmtp configuration files."
       :interactive)
   #+END_SRC

   I also need to add it to the =auto-mode-alist= so ~.msmtprc~ is
   opened with msmtprc mode.

   #+BEGIN_SRC emacs-lisp
     (add-to-list 'auto-mode-alist '("\\.msmtprc\\'" . msmtprc-mode))
   #+END_SRC

** Git commit mode

   Enable =electric-quote-local-mode= to easily type nice-looking
   quotes while writing commits.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'git-commit-mode-hook 'electric-quote-local-mode)
   #+END_SRC

** Python mode

   Enable electric pair mode.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'python-mode-hook 'electric-pair-local-mode)
   #+END_SRC

   Enable syntax and style checking with flycheck.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'python-mode-hook 'flycheck-mode)
   #+END_SRC

* Applications

** Magit

   Magit is a very nice interface to Git for Emacs. It allows you to
   do just about anything with Git without leaving the comfort of your
   Emacs session.

   #+BEGIN_SRC emacs-lisp
     (ensure-library magit)
   #+END_SRC

   Show refined diffs in magit. This makes it much easier to see
   /what/ has changed on a line.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'magit))

     (with-eval-after-load 'magit
       (setq magit-diff-refine-hunk 'all))
   #+END_SRC

** Gnus

   Gnus is one of the most extensible Email programs on the
   planet. And it's not even made for email but NNTP.

   Store all Gnus-related data in my data directory.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'gnus))

     (with-eval-after-load 'gnus
       (setq gnus-directory (oni:data-location "News")
             gnus-article-save-directory gnus-directory
             gnus-cache-directory gnus-directory
             gnus-kill-files-directory gnus-directory))
   #+END_SRC

   Store all Mail source-related data in my data directory.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'mail-source))

     (with-eval-after-load 'mail-source
       (setq mail-source-directory (oni:data-location "Mail")))
   #+END_SRC

   Store all message-related data in the same place as the Mail source
   data.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'message))

     (with-eval-after-load 'message
       (setq message-directory (oni:data-location "Mail")))
   #+END_SRC

   Store all nnfolder-related data in the same place as the Mail
   source data.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'nnfolder))

     (with-eval-after-load 'nnfolder
       (setq nnfolder-directory (oni:data-location "Mail")))
   #+END_SRC

   Use msmtp to send mail.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'sendmail))

     (with-eval-after-load 'sendmail
       (setq send-mail-function 'sendmail-send-it)
       (setq sendmail-program "/usr/bin/msmtp"))
   #+END_SRC

   Tell Gnus I'm not a novice anymore. One of the features of Gnus I
   use a lot is deleting messages and as long as Gnus thinks I'm a
   novice it will ask me if I'm sure every single time.

   #+BEGIN_SRC emacs-lisp
     (setq gnus-novice-user nil)
   #+END_SRC

   Add a keybinding to the Gnus summary mode to easily delete
   messages.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'gnus
       (define-key gnus-summary-mode-map (kbd "M-d") 'oni-gnus-delete-forward))
   #+END_SRC

*** ryuslash.org

    Set my main email address as the primary select method for Gnus.

    #+BEGIN_SRC emacs-lisp
      (with-eval-after-load 'gnus
        (setq gnus-select-method
              '(nnmaildir "ryuslash" (directory "~/documents/mail/ryuslash/"))))
    #+END_SRC

    When sending mail from the ryuslash inbox, use the ryuslash msmtp
    account.

    #+BEGIN_SRC emacs-lisp
      (eval-when-compile (require 'gnus-msg))

      (with-eval-after-load 'gnus-msg
        (add-to-list 'gnus-posting-styles
                     '(".*"
                       (address "tom@ryuslash.org")
                       (eval (setq message-sendmail-extra-arguments
                                   '("-a" "ryuslash"))))))
    #+END_SRC

*** picturefix

    Add my work email account as a secondary select method.

    #+BEGIN_SRC emacs-lisp
      (with-eval-after-load 'gnus
        (add-to-list 'gnus-secondary-select-methods
                     '(nnmaildir "picturefix"
                                 (directory "~/documents/mail/picturefix/"))))
    #+END_SRC

    When sending mail from the picturefix account, use the picturefix
    msmtp account and set the proper name and email address.

    #+BEGIN_SRC emacs-lisp
      (with-eval-after-load 'gnus-msg
        (add-to-list 'gnus-posting-styles
                     '("picturefix:"
                       (name "Tom Willemsen")
                       (address "tom@picturefix.nl")
                       (eval (setq message-sendmail-extra-arguments
                                   '("-a" "picturefix"))))))
    #+END_SRC

*** gmail

    Add my other personal email as a secondary select method.

    #+BEGIN_SRC emacs-lisp
      (with-eval-after-load 'gnus
        (add-to-list 'gnus-secondary-select-methods
                     '(nnmaildir "gmail"
                                 (directory "~/documents/mail/gmail/"))))
    #+END_SRC

    When sending mail from the gmail account, use the gmail msmtp
    accound and set the proper email address.

    #+BEGIN_SRC emacs-lisp
      (with-eval-after-load 'gnus-msg
        (add-to-list 'gnus-posting-styles
                     '("gmail:"
                       (name "Tom Willemse")
                       (address "ryuslash@gmail.com")
                       (eval (setq message-sendmail-extra-arguments
                                   '("-a" "gmail"))))))
    #+END_SRC

** Linewise user-interface

   This is the library used by Circe and Slack to display messages.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'lui))
   #+END_SRC

   Put the time stamp in lui buffers in the right margin. This gives
   the text some extra room.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'lui
       (setq lui-time-stamp-position 'right-margin))
   #+END_SRC

   Remove the "[]" from the time stamp, it's not really necessary.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'lui
       (setq lui-time-stamp-format "%H:%M"))
   #+END_SRC

   Give the right margin just enough room to show the time-stamps, no
   more, no less.

   #+BEGIN_SRC emacs-lisp
     (defun oni:set-circe-margin-width ()
       (setq right-margin-width 5))

     (add-hook 'lui-mode-hook #'oni:set-circe-margin-width)
   #+END_SRC

   Fix the wrap prefix so that text at the prompt is aligned properly.

   #+BEGIN_SRC emacs-lisp
     (defun oni:set-lui-prompt-wrap-prefix ()
       (setq wrap-prefix "  "))

     (add-hook 'lui-mode-hook #'oni:set-lui-prompt-wrap-prefix)
   #+END_SRC

   Enable visual line mode in lui buffers so my text doesn't go
   off-screen.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'lui-mode-hook 'visual-line-mode)
   #+END_SRC

   Turn off filling in lui buffers. I use visual-line mode instead.

   #+BEGIN_SRC emacs-lisp
     (setq lui-fill-type nil)
   #+END_SRC

** Circe

   I switched to Circe from ERC because I couldn't make the
   customizations I wanted to, Circe seems much better at this.

   #+BEGIN_SRC emacs-lisp
     (ensure-library circe)
   #+END_SRC

   Make sure that Emacs knows these function exist when the file is
   being compiled.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'oni-circe))
   #+END_SRC

   I spend most of my time on IRC on Freenode.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'circe))

     (with-eval-after-load 'circe
       (add-to-list 'circe-network-options
                    `("Freenode"
                      :nick "ryuslash"
                      :channels ("#emacs"
                                 "#mowedline"
                                 "#ninthfloor"
                                 "#dispass"
                                 "#linuxvoice"
                                 "#conkeror")
                      :nickserv-password
                      ,(oni-circe-get-password-for "irc.freenode.net"))))
   #+END_SRC

   Sometimes I watch some Twitch streams as well.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'circe
       (add-to-list 'circe-network-options
                    `("Twitch"
                      :use-tls nil
                      :nick "ryuslash"
                      :host "irc.twitch.tv"
                      :pass ,(oni-circe-get-password-for "irc.twitch.tv")
                      :port 6667)))
   #+END_SRC

   Enable coloring of nicks.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'circe
       (require 'circe-color-nicks)
       (enable-circe-color-nicks))
   #+END_SRC

   Align all nicks.

   #+BEGIN_SRC emacs-lisp
     (ensure-library sermon
       :path "vendor-lisp/sermon")

     (with-eval-after-load 'circe
       (require 'sermon)
       (enable-sermon))
   #+END_SRC

** Org

   Tell org-mode to fontify code blocks in their specified languages.

   #+BEGIN_SRC emacs-lisp
     (eval-when-compile (require 'org))

     (with-eval-after-load 'org
       (setq org-src-fontify-natively t))
   #+END_SRC

   Enable automatic text filling for org-mode.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'org-mode-hook 'auto-fill-mode)
   #+END_SRC

** Jabber

   I like using XMPP to talk to people, jabber.el is very good at
   this.

   #+BEGIN_SRC emacs-lisp
     (ensure-library jabber)
     (eval-when-compile (require 'jabber))
   #+END_SRC

   Add my account.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-account-list
           `((,(concat "ryuslash@dukgo.com/" (system-name)))
             (:connection-type . starttls)))
   #+END_SRC

   Store any persistent data in the data directory.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-avatar-cache-directory (oni:data-location "jabber/avatars/")
           jabber-history-dir (oni:data-location "jabber/hist/"))
   #+END_SRC

   Change the default prompts.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-chat-buffer-format         "+%n"
           jabber-chat-foreign-prompt-format "%t %u"
           jabber-chat-local-prompt-format   "%t %u"
           jabber-chat-delayed-time-format   "%H:%M"
           jabber-groupchat-buffer-format    "++%n"
           jabber-groupchat-prompt-format    "%t %u")
   #+END_SRC

   Don't show avatars, publish or retrieve avatars.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-chat-buffer-show-avatar nil
           jabber-vcard-avatars-publish   nil
           jabber-vcard-avatars-retrieve  nil)
   #+END_SRC

   Don't fill long lines in jabber chat buffers, but use visual line
   mode.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-chat-fill-long-lines nil)

     (add-hook 'jabber-chat-mode-hook 'visual-line-mode)
   #+END_SRC

   Don't send notifications about chat states.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-chatstates-confirm nil)
   #+END_SRC

   Colorize text in multi-user chats.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-muc-colorize-local   t
           jabber-muc-colorize-foreign t)
   #+END_SRC

   Enable recording history.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-history-enabled    t
           jabber-use-global-history nil)
   #+END_SRC

   Clean up the default view of the roster buffer.

   #+BEGIN_SRC emacs-lisp
     (setq jabber-roster-show-bindings  nil
           jabber-show-offline-contacts nil)

     (add-hook 'jabber-roster-mode-hook 'oni-jabber-set-roster-mode-line)
   #+END_SRC

   Use libnotify to send jabber notifications.

   #+BEGIN_SRC emacs-lisp
     (add-hook 'jabber-alert-message-hooks 'jabber-message-libnotify)
     (add-hook 'jabber-alert-muc-hooks     'jabber-muc-libnotify)
   #+END_SRC

   Don't echo presence changes in the mode line, show them in the
   relevant buffer instead.

   #+BEGIN_SRC emacs-lisp
     (with-eval-after-load 'jabber-alert
       (remove-hook 'jabber-alert-presence-hooks 'jabber-presence-echo))

     (add-hook 'jabber-alert-presence-hooks 'oni-jabber-show-status-in-buffer)
   #+END_SRC

* Custom

  Put the customize settings in a different file so that Emacs doesn't
  have to modify this file whenever something changes through
  customize. I put this into my init file last so any settings made in
  there *can* overwrite the ones in the rest of the file, not that I
  usually like to do that.

  #+BEGIN_SRC emacs-lisp
    (setq custom-file (concat user-emacs-directory "custom.el"))
    (load custom-file)
  #+END_SRC