From ae88b52c43068a0e49cbc716fdea86ffe042abed Mon Sep 17 00:00:00 2001
From: Tom Willemse
Date: Mon, 6 Mar 2023 10:22:38 -0800
Subject: [rincewind] Add mkninitcpio settings

---
 rincewind.org | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

(limited to 'rincewind.org')

diff --git a/rincewind.org b/rincewind.org
index 05a2e8c..f1fd47d 100644
--- a/rincewind.org
+++ b/rincewind.org
@@ -3,3 +3,92 @@ Disable the PC Speaker because I get annoyed at it beeping at me all the time.
 #+begin_src conf :tangle "/sudo::/etc/modprobe.d/nobeep.conf"
   blacklist pcspkr
 #+end_src
+
+* mkinitcpio
+
+Enable the =amdgpu= module because I have an AMD video card.
+
+#+begin_src conf-unix :noweb-ref mkinitcpio-modules
+  MODULES=(amdgpu)
+#+end_src
+
+Set up the hooks loaded into the image. Use =mkinitcpio -H <MODULE>= to find out what a module does.
+
+- =base= :: Crucial runtime necessities for booting. Should always be included.
+- =udev= :: Adds the udev daemon to the initramfs to allow dynamic loading of modules and reliable detection of the root device via UUID.
+- =autodetect= ::
+
+#+begin_src conf-unix :noweb-ref mkinitcpio-hooks
+  HOOKS=(base udev autodetect modconf block keymap consolefont encrypt filesystems keyboard fsck)
+#+end_src
+
+#+begin_src conf-unix :noweb yes
+  # vim:set ft=sh
+  # MODULES
+  # The following modules are loaded before any boot hooks are
+  # run.  Advanced users may wish to specify all system modules
+  # in this array.  For instance:
+  #     MODULES=(piix ide_disk reiserfs)
+  <<mkinitcpio-modules>>
+
+  # BINARIES
+  # This setting includes any additional binaries a given user may
+  # wish into the CPIO image.  This is run last, so it may be used to
+  # override the actual binaries included by a given hook
+  # BINARIES are dependency parsed, so you may safely ignore libraries
+  BINARIES=()
+
+  # FILES
+  # This setting is similar to BINARIES above, however, files are added
+  # as-is and are not parsed in any way.  This is useful for config files.
+  FILES=()
+
+  # HOOKS
+  # This is the most important setting in this file.  The HOOKS control the
+  # modules and scripts added to the image, and what happens at boot time.
+  # Order is important, and it is recommended that you do not change the
+  # order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+  # help on a given hook.
+  # 'base' is _required_ unless you know precisely what you are doing.
+  # 'udev' is _required_ in order to automatically load modules
+  # 'filesystems' is _required_ unless you specify your fs modules in MODULES
+  # Examples:
+  ##   This setup specifies all modules in the MODULES setting above.
+  ##   No raid, lvm2, or encrypted root is needed.
+  #    HOOKS=(base)
+  #
+  ##   This setup will autodetect all modules for your system and should
+  ##   work as a sane default
+  #    HOOKS=(base udev autodetect block filesystems)
+  #
+  ##   This setup will generate a 'full' image which supports most systems.
+  ##   No autodetection is done.
+  #    HOOKS=(base udev block filesystems)
+  #
+  ##   This setup assembles a pata mdadm array with an encrypted root FS.
+  ##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+  #    HOOKS=(base udev block mdadm encrypt filesystems)
+  #
+  ##   This setup loads an lvm2 volume group on a usb device.
+  #    HOOKS=(base udev block lvm2 filesystems)
+  #
+  ##   NOTE: If you have /usr on a separate partition, you MUST include the
+  #    usr, fsck and shutdown hooks.
+  <<mkinitcpio-hooks>>
+
+  # COMPRESSION
+  # Use this to compress the initramfs image. By default, zstd compression
+  # is used. Use 'cat' to create an uncompressed image.
+  #COMPRESSION="zstd"
+  #COMPRESSION="gzip"
+  #COMPRESSION="bzip2"
+  #COMPRESSION="lzma"
+  #COMPRESSION="xz"
+  #COMPRESSION="lzop"
+  #COMPRESSION="lz4"
+
+  # COMPRESSION_OPTIONS
+  # Additional options for the compressor
+  #COMPRESSION_OPTIONS=()
+
+#+end_src
-- 
cgit v1.2.3-54-g00ecf